guide reset

RC » Home » Resetter Canon iP2770 v1074

---

Resetter Canon iP2770 v1074

If you do not have a try Download Resetter Canon iP2770 v1074 are widely spread on the internet
 First into Service Mode iP2770:
 1. The printer is turned off and the power cord.
 2. Press the RESUME button two seconds
 then press the POWER button until the green light flash (when pressing the POWER button, ... RESUME button jgn removed first)
 3. Then release the Resume button, but do not release the button POWER.
 4. While the POWER button is still depressed, press the Resume button 5 times. Led will flash alternately orange last green with orange flames. (not to be mistaken 4x because the printer will die in total, but it is temporary too) Then ...
 5. Release both buttons simultaneously.
 6. Led will blink for a while then it will flash GREEN.
 7. The computer will detect the new device, ignore it .....
 8. This situation shows iP2770 printer in a state of SERVICE MODE and ready to reset.

 Then run Resetter iP2770 v1074 it:
 1. File Exctract Resetter iP2770.
 2. Prepare 2 paper in the printer (to print at the time of the reset process).
 3. Run the program Resetter iP2770
 4. Click "PLAY", then the printer will proceed, then the iP2770 will print a page with the words "D = 000.0"
 5. Click "EEPROM Clear".
 6. Then click "EEPROM", and the printer will print the results Resetter iP2770. One line in his writings as follows:
 "TPage (TTL = 00000)"
 7. Turn off the printer by pressing the POWER button.
 8. Done