guide reset

RC » Home » epson » reset procedure for EPSON RX500

---

reset procedure for EPSON RX500

Protection counter is the counter for wasted ink; it says to printer how
much space it has in special tray where all wasted ink are going during
cleaning procedures. With time it became full (printer just won't print
in this case) and absorbtion padding must be replaced. After replacing
the padding You must reset the protection counter to zero in order to
continue ordinary printing.


Repair or reset procedure for EPSON RX500:
Press all following buttons :Power, Load/Eject, Stop, B&W, Color,
after this printer turns on and you'll see "Init eeprom" on printer screen.
Press Color button to clear protection counter.

Alternate. Hold down "clear + setup + on"
Continue
to hold the buttons until the printer had powered on, then off again,
then back on. Once you noticed that the LCD had flashed a blank screen,
let go of the 3 keys. In the LCD window you now have access to 3
options using the select keys.

Look for an abbreviation
resembling "ink pad level" . Here is where Held down the clear button
for around 10 seconds. LCD must read "Press Power to Reset."