Showing posts with label on. Show all posts
Showing posts with label on. Show all posts
Saturday, March 2, 2013
Bypass the Microchips on Canon Inkjet Cartridges
Careful Ravine machine models love a microchip that tells the machine how overmuch ink is socialist in the pickup as fountainhead as if the cartridge came direct from Canon. If you are using a refilled or aftermarket pickup in a Canon machine, the ink monitoring software testament solid the use of the pickup. There is, yet, a way to get around the monitoring software.
Arise the instruction below :
* Rotation on your Canon machine and inactivity for the warm-up transform to skilled. Give the printers way threshold and act for the pickup car to arrive to a exhaustive grab.
* Withdraw the cartridge to be replaced and infix the refilled or aftermarket pickup. Intimate the machines make door.
* Act for the printer to observe the new pickup. An incorrectness message will develop up on the choose to say the machine cannot notice the ink stage on the new cartridge.
* Emit on "Yes" to inform that you requisite to use the new cartridge despite the attempt of hurt to the machine if the cartridge leaks.
* Dawn on "Yes" one statesman time to respond that you understand Canon give not be responsible for casualty done to the machine by the new pickup.
* Exhort and concord the "Resume" fix on the machine for at littlest phoebe seconds. The "Uphold" fasten faculty be flashing. If your printer does not hold the "Continue" fix, counsel and intermission the "Ok" or "Balance" add.
* Use the machine as average, holding in purpose the ink monitoring software present not convey the ink steady for the new cartridge.
ReadMore
Arise the instruction below :
* Rotation on your Canon machine and inactivity for the warm-up transform to skilled. Give the printers way threshold and act for the pickup car to arrive to a exhaustive grab.
* Withdraw the cartridge to be replaced and infix the refilled or aftermarket pickup. Intimate the machines make door.
* Act for the printer to observe the new pickup. An incorrectness message will develop up on the choose to say the machine cannot notice the ink stage on the new cartridge.
* Emit on "Yes" to inform that you requisite to use the new cartridge despite the attempt of hurt to the machine if the cartridge leaks.
* Dawn on "Yes" one statesman time to respond that you understand Canon give not be responsible for casualty done to the machine by the new pickup.
* Exhort and concord the "Resume" fix on the machine for at littlest phoebe seconds. The "Uphold" fasten faculty be flashing. If your printer does not hold the "Continue" fix, counsel and intermission the "Ok" or "Balance" add.
* Use the machine as average, holding in purpose the ink monitoring software present not convey the ink steady for the new cartridge.
Sunday, February 17, 2013
this is step you can try how to reset waste ink full canon on Canon MP190
this is step you can try how to reset waste ink full canon on Canon MP190
1) Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of
3)), and then press the [ON/OFF] key
happy resetter and enjoy
ReadMore
1) Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of
3)), and then press the [ON/OFF] key
happy resetter and enjoy
Wednesday, February 13, 2013
Solid Black Line on Printed Page
One of the most common problem in photocopiers and printers is "solid black line on printed pages". The reasons behind this issue can be so different but you may follow some easy steps to fix this problem yourself before calling for technical support.
First of all have a brief look inside the printer. If it is dirty (paper dust, toner etc) just clean it well. You may like to use an air blower to accomplish this task. If you got a photocopier, clean the scanning glass surface with a wet cloth. Some copier machines have two glasses (big and a small one in case the copier has auto document feeder). Dont forget to clean the small glass lying under the ADF paper path.
If your laser printer is printing black solid lines continuously than most probably its drum has gone and need to be replaced. Rarely a dirty corona wire or charge roller also cause this problem. Since modern printers have all these components in one package so you need not to be worried about which of these parts is defective. Just take a breath and purchase whole drum unit (somtimes called an "imaging unit").
Non original toners are cost effective but since they are not always fully compatible with printers, their particles may reside on the fixing rollers making a thin layer of toner which finally results in black solid line on printed pages.
In inkjet printers a faulty print head causes solid black line. Fortunately most of the printer manufacturers provide some kind of utilities to clean the print head. If it doesnt work replace the print head.
First of all have a brief look inside the printer. If it is dirty (paper dust, toner etc) just clean it well. You may like to use an air blower to accomplish this task. If you got a photocopier, clean the scanning glass surface with a wet cloth. Some copier machines have two glasses (big and a small one in case the copier has auto document feeder). Dont forget to clean the small glass lying under the ADF paper path.
If your laser printer is printing black solid lines continuously than most probably its drum has gone and need to be replaced. Rarely a dirty corona wire or charge roller also cause this problem. Since modern printers have all these components in one package so you need not to be worried about which of these parts is defective. Just take a breath and purchase whole drum unit (somtimes called an "imaging unit").
Non original toners are cost effective but since they are not always fully compatible with printers, their particles may reside on the fixing rollers making a thin layer of toner which finally results in black solid line on printed pages.
In inkjet printers a faulty print head causes solid black line. Fortunately most of the printer manufacturers provide some kind of utilities to clean the print head. If it doesnt work replace the print head.
Sunday, February 10, 2013
Reset Ink Level on Canon PG 40 41 using iPtool software
This problem usually appear after refilled the cartridge on the canon printer and ink level indicator showing the ink cartridge is empty although you have filled a cc Ink into the cartridge. And if the problem occur you cannot using your printer to print. The solution you must reset ink level on the printer if you want your computer work again.
If you have a problem like that you ca follow this tutorial to solve your printer problem, here how:
1. Turn of the printer and Disconnect the power cable to the printer.
2. Press power button on the printer. While pressing the button connect the power cable to the power source (the power indicator will light in green)
3. While still holding power button press resume button twice – orange blink and return to green.
4. Release the power button, then the PC will recognize new cartridge installed (If the power indicator on the printer steady in green you continue to Steps 5)
5. Run the IPtools software, please await after this software detect your printer correctly or you can set the printer model on “Change Model” section.
6. Click “reset black and reset color” button to reset the ink level and Click “reset main and reset platen” to reset waste ink counter. After clicked the button you will see ink level of the cartridge on in the IPTol info has 100% and WP and WM has set to 0. Click Exit on IPTool
7. Turn off the printer and turn on again.
On the reset procedure above usually the problem found on steps 1-4 to make the printer steady light in green. On my experiment if steps 1-4 does not work on your printer, you can use manual reset method for canon iP1700 before continue to steps 5.
Saturday, February 9, 2013
Error E019 on Canon
Printer and photocopiers are designed in two different ways. The first type uses a mechanism that collects waste toner from the drum and sends it back to the developing unit or toner hopper to mix with new toner particles. This mixture is than utilized for further use. Although the ratio of used toner is very low, this method is not recommended for high quality printing. High quality printers and photocopiers apply another system that sends waste toner into a collection box instead of mixing with new toner. Thus only fresh toner is mixed with the developer and higher print quality can be achieved.
What is Error E019?
Error E019 in Canon copiers indicates that waste toner box is full and needs to be cleaned or disposed of. Failure to do so may result in background on printed pages. Canon recommends inspecting waste toner box after certain number of copies has been made (usually, but not necessarily more than 100,000). Be sure to dispose of the waste toner according to the standards imposed by the government concerned. Do not dispose of it into fire to avoid explosion.
Where waste toner case is located?
Location of waste toner case varies in each model. Usually it is located near the developing unit and can be seen easily. While it is difficult to discuss all models here, I’d like to explain Canon IR2200 as an example. You will find a plastic cover on left rear side of this machine. Remove one screw, detach the cover and take out the waste toner box. Dispose of the waste toner collecting inside the waste toner case. Clean both inside and outside of the waste toner case with alcohol. Don’t forget to clean the neck of the box because the waste toner might block the toner sensor path. Now fit the waste toner case back in the machine and mount the waste toner case cover with a screw.
Other Causes of Error E019
A faulty waste toner sensor may be another cause of Error E019. To confirm, restart the machine with no waste toner case inside. If it still displays E019 then most probably the sensor has gone.
Very rarely, a defective DC controller board PCB also result in E019.
How to reset:
After cleaning the waste toner box, turn the machine off then on to reset E019. If this doesn’t work, follow reset procedure described in this post.
Above mentioned description of E019 is valid for a lot of Canon photocopier models including Imagerunner600, IR1018, IR2018, IR2016, IR3300, IR1019, IR1023, IR2230, IR1024, etc.
Error E019 in Canon copiers indicates that waste toner box is full and needs to be cleaned or disposed of. Failure to do so may result in background on printed pages. Canon recommends inspecting waste toner box after certain number of copies has been made (usually, but not necessarily more than 100,000). Be sure to dispose of the waste toner according to the standards imposed by the government concerned. Do not dispose of it into fire to avoid explosion.
Where waste toner case is located?
Location of waste toner case varies in each model. Usually it is located near the developing unit and can be seen easily. While it is difficult to discuss all models here, I’d like to explain Canon IR2200 as an example. You will find a plastic cover on left rear side of this machine. Remove one screw, detach the cover and take out the waste toner box. Dispose of the waste toner collecting inside the waste toner case. Clean both inside and outside of the waste toner case with alcohol. Don’t forget to clean the neck of the box because the waste toner might block the toner sensor path. Now fit the waste toner case back in the machine and mount the waste toner case cover with a screw.
Other Causes of Error E019
A faulty waste toner sensor may be another cause of Error E019. To confirm, restart the machine with no waste toner case inside. If it still displays E019 then most probably the sensor has gone.
Very rarely, a defective DC controller board PCB also result in E019.
How to reset:
After cleaning the waste toner box, turn the machine off then on to reset E019. If this doesn’t work, follow reset procedure described in this post.
Above mentioned description of E019 is valid for a lot of Canon photocopier models including Imagerunner600, IR1018, IR2018, IR2016, IR3300, IR1019, IR1023, IR2230, IR1024, etc.
Subscribe to:
Posts (Atom)