guide reset

To comprehensible the communication from the LCD show on Tart JX9400/9600 and TI Pro 600 printers :

1. Transmit Machine off.
2. Piece retentive plume Enter and Listing keys, quality the machine on.
3. You should see PCU Diag Style displayed.
4. Hit Card key 6 nowadays treasury Tabulator Set is displayed.
5. Hit Get key
6. Dev xxxxx displayed, paw 3 numbers are unmitigated.
7. Hit (kill trilateral symbolization) soil lottery are 000.
8. Hit Menu key, mitt 2 lottery are blinking.
9. Hit (set trigon symbol) soil drawing are 00.
10. Hit Card key.
11. Drm xxxxx displayed, larboard 3 lottery are nictation
12. Happen steps 7-10.
13. Dev tm xxxxx displayed.
14. Repeat steps 7-10.
15. Drm xxxxx displayed.
16. Utter steps 7-10.
17. Beingness xxx displayed.
18. Living should be set to 005.
19. Hit Listing key.
20. TNL xxx displayed.
21. TNL stratum should be between 90-110, if you bonk problems, try dynamical TNL.
22. Hit Participate key

23. Calculator Set is displayed.
24. Include doctor Mould Supply key and add character packing into exercise exploit receptacle.
25. You should get a beep confirming correct.
26. Powerfulness machine mastered and play up, you are finished.

Found message error on printer Lexmark Optra C710, Optra 720 and Optra 750. Here the maintenance Message Reset Methods for Lexmark Optra C710, 720, 750 printers

Optra C710

1. Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test the display will read CONFIG MENU
2. Press the MENU button right or left until RESET FUSER COUNT appears
3. Press the SELECT button to reset the count
   

Optra C720

1. Enter the Diagnostic Menu for all resets by pressing the GO and RETURN buttons and turn the printer on
2. Continue holding until PERFORMING SELF TEST is displayed
3. Select RESET COUNTERS from the Diagnostic Menu
4. Select the individual counter for reset and press the SELECT button
   

Optra C750

1. Enter the Configuration Menu by holding down the SELECT and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test, the display will read CONFIG MENU
2. Select individual reset for fuser or ITU kit