Saturday, February 23, 2013
How to Reset Canon MP258
FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,
1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.
SECOND STEPS: Using the Resetter
1. After you download the resetter, extract it and double click “servicetool.exe”
2. Click Reload Button and you will get a new USB port.
3. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
4. Then press “EEPROM Clear” button to clear EEPROM.
5. Then press EEPROM button and the printer will print some text.
6. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!
Friday, February 22, 2013
HP Officejet J4660 ink cartridge 901
how to set the ink levelon your HP printer. On ehow go to ehow diplomatist come 30(machine printer guide). You can also buy a gum gun to fill the depression, you can also powdery all form of forbear in this web position. Comic this refrain Anonymous/momo32526.I adhesive from the web attendant, You can go to the web situation it has representation. trust this aid. momo32526 Travail: ModerateInstructionsThings Youll Impoverishment:
Ink cartridge Enter
Tread 1Turn your machine on and undergo out the cartridges.
Rank 2 Cross a bushel of taping and screening lens 1, as in the show below.
Interval 3Put the pickup sustain into the printer. It instrument create out an encounter iplomat.
Maneuver 4 Support the pickup out and put recording over communication 2, as in the render below.
Stair 5Remove all the video and put the cartridge backrest into the printer. The ink levels should now be set.
ReadMore
Ink cartridge Enter
Tread 1Turn your machine on and undergo out the cartridges.
Rank 2 Cross a bushel of taping and screening lens 1, as in the show below.
Interval 3Put the pickup sustain into the printer. It instrument create out an encounter iplomat.
Maneuver 4 Support the pickup out and put recording over communication 2, as in the render below.
Stair 5Remove all the video and put the cartridge backrest into the printer. The ink levels should now be set.
Examination of the samples in the Information Management Guide Book
This book contains contributions from many researchers who have different ways of addressing the question of is it field, commit time, energy and creativity of the players feel that they are significant areas of research in information management.
Table of content:
-Introduction
-Information systems for concerted actions
-IT: Ambigous technology
-The Paradox of perfect knowledge discovery
-Help users learn Errors
-Models of information management, multi level analysis of the Swedish company
-Choice problem
-The rear cover.
This book contains 356 pages and is available for free download in pdf format.
Download link:
http://www.CIS.gsu.edu/~ dstraub/XCV3-2/a PDF Book.
CANON IP8500 WASTE TANK FULL RESET CODE
First thing you need to do is print an EEPROM information page, step number 2 below.
Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.
Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
With the printer powered off, hold down the resume button and press the power button.
While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button.
The indicator will blink in green and remain lit in green.
Select one of the following service mode functions by pressing the “RESUME Button” the specified number of times.
1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
4 times = Waste ink counter resetting
5 times = Destination settings
6 times = Print head deep cleaning
Then press the “Power Button” one time to perform the function just selected.
ReadMore
Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.
Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
With the printer powered off, hold down the resume button and press the power button.
While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button.
The indicator will blink in green and remain lit in green.
Select one of the following service mode functions by pressing the “RESUME Button” the specified number of times.
1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
4 times = Waste ink counter resetting
5 times = Destination settings
6 times = Print head deep cleaning
Then press the “Power Button” one time to perform the function just selected.
Canon IC MF6530 6550 6560 6580
Canon IC-MF6530/6550/6560/6580 is digital black & white machine.
Speed: 23 Copies per minute,
Duplex: Built in
MF6550 and MF 6560 equipped with fax while MF 6580 is equipped with fax and network card.
This is a mono-component machines with no developer setup. Drum unit is customer replaceable and have no service procedures necessary. This series of machines has no PM schedule and no stated yields for anything except the drum and cartridge.
How to enter the Service Mode:
Press "additional function" key, "2" key, "8" key, "additional function" key in that order.
Trouble Codes:
Trouble Codes from E 000-xxxx to E 003-xxxx are related to fuser errors. There is no procedure to reset fuser errors. Apparently replacing the fuser is the only repair. However, Service mode softswitch 01 bit 3 (00100000) may be a reset procedure. Thisy may not be necessary.
E100-0000: Laser problem, Laser unit or Laser BD board
E805-0000 Fan or DC controller
E808-0000 Fuser film, fuser drive motor, power supply board or DC controller.
User Modes:
Press Additional Function Key. Use left/right arrow to select item. Press OK key to enable function, clean item, etc. Press left/ right arrow keys to select particular function, change item, etc.
In this mode you can find following settings:
Common Settings:
Toner save mode on/off. Printer density, auto cassete select, regular paper types, Sleep mode energy level, ADF dirty warning on or off etc
Copy setting:
Image priority on/off. Collate off/on, Duplex off/on, Frame erase on or off. Standard settings (text, photo, auto collate etc), Sharpness, Paper size etc
Ajust/Cleaning:
Clean transfer roller clean fuser, clean document feeder, different modes of fuser operation for different paper situations etc.
System Setting:
Device information, network setting, communications, remote UI on/off, USB device use etc.
Thursday, February 21, 2013
To reset the HP C6657A 57 or HP C8728A 28
To reset the HP C6657A (#57) or HP C8728A (#28):
1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Following the diagram at right, place a piece of adhesive tape covering the only the blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.
3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.
4. Take the cartridge out of the printer. Leave the tape from blue contact. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.
5. Follow step 3 again.
6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.
Reset Method 2:
If Reset Method 1 did not work on your printer, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.
ReadMore
1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Following the diagram at right, place a piece of adhesive tape covering the only the blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.
3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.
4. Take the cartridge out of the printer. Leave the tape from blue contact. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.
5. Follow step 3 again.
6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.
Reset Method 2:
If Reset Method 1 did not work on your printer, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.
Reset Waste Ink Canon IP1500
Step 1 Manual for Service mode to reset waste ink or blinking canon ip1500
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
Step 2 Use software for Permanent to reset waste ink
download tool to reset permanent waste ink.
this resetter printer Canon IP 1500. This tool can reset waste ink for canon ip1500 permanent
User guide:
1.
Unzip downloaded file.
2.
Run GeneralTool.exe
3.
Select the connected USB port number from USB port
4.
Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
5.
In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.
If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.
http://www.savefile.com/files/1039880
http://soulved.blogspot.com
ReadMore
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
Step 2 Use software for Permanent to reset waste ink
download tool to reset permanent waste ink.
this resetter printer Canon IP 1500. This tool can reset waste ink for canon ip1500 permanent
User guide:
1.
Unzip downloaded file.
2.
Run GeneralTool.exe
3.
Select the connected USB port number from USB port
4.
Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
5.
In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.
If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.
http://www.savefile.com/files/1039880
http://soulved.blogspot.com
Subscribe to:
Posts (Atom)